Lubricating Fluids

GLEIT-μ^® SF 610 is a light-colored liquid corrosion protection on the basis of an environmentally friendly solvent. After application and evaporation of the solvent GLEIT-μ^® SF 610 is a dry, barely visible, flexible, highly temperature-resistant corrosion protection film with excellent lubricating properties. The corrosion protection properties of GLEIT-μ^® SF 610 are superior compared to most conventional corrosion protection films. Furthermore the film is oil and grease free, highly temperature-stable, barely visible, clean and dry. A particular advantage of the lubricant film is the fact that cleaning of machines or machine parts, which were treated with GLEIT-μ^® SF 610, may be omitted in most cases.

GLEIT-μ^® SF 610 was especially developed for use as a preservative. It is used for parts that must be permanently clean and protected against corrosion, either for transportation or for storage – especially if the parts should not be cleaned prior to commissioning. GLEIT-μ^® SF 610 may also be used as a lubricant with anti-corrosion properties.

• conservation of machines and machine parts for transportation (textile machines, construction equipment)
• temporary storage of semi-finished and intermediate or long-term storage of machinery and components
• corrosion protectionfor boltcoat^®-systems
• lubrication of mechanisms that also need protection against corrosion

• very good corrosion protection
• clean and dry
• barely visible
• flexible film
• excellent lubricating properties
• environment-friendly solvent
• simple application
• long lasting
• Temperature range: -40 to +80 °C

GLEIT-μ^® SF 611 is a universal quick rust remover that is based on a specially selected combination of base oils with a matching additive package. GLEIT-μ^® SF 611 has exceptional rust dissolving and cleaning properties, lubricates well and also acts as a preservative.

The main area of use of GLEIT-μ^® SF 611 is for loosening seized or burned connections, such as screws or bolts. This lubricating fluid is also suitable for the lubrication of machine elements that require a thin lubricating film, that must be protected against corrosion or whose surface moisture is to be displaced.

• Loosening of burnt or seized screw connections
• Thin film lubrication and preservation of machine parts (e.g. bicycle chains, locks, springs) and measuring instruments
• Moisture displacement on controllers, plugs, distributors
• cleaning machine elements and preserving them at the same time

• rust remover
• extreme creepage capacity
• very high loosening power for corroded and burnt connections, such as screws
• good lubricant
• protects well against corrosion
• repels moisture
• Temperature range: -40 to +80 °C

GLEIT-μ^® SF 630 is based on a specially selected combination of biodegradable base oils with precisely matched, colloidally dissolved, light-coloured solid lubricants.

This lubricant combines the requirement for a product for three applications: loosening – protecting – lubricating.

lets you loosen corroded screw connections very effectively, while also lubricating and preserving machine components. GLEIT-μ^® SF 630 is highly biodegradable and non-toxic. Thanks to the colloidally dissolved, light-coloured solid lubricants, GLEIT-μ^® SF 630 achieves unique lubrication and wear properties, in spite of the thin, barely visible lubricating film.

The area of application of GLEIT-μ^® SF 630 is the lubrication of components and machine elements that require a thin, highly effective lubricating film that is as clean as possible and environmentally friendly. Due to the low-viscosity, easily penetrating base oil, GLEIT-μ^® SF 630 is also very suitable for loosening burnt or corroded screw connections and as a general preservative.

• linkages, chains, hinges
• Loosening of burnt or seized screw connections
• thin film lubrication and preservation of machine parts (e.g. bicycle chains, springs, locks) and measuring instruments, especially in the event of a possible risk of the lubricant coming into contact with the environment
• corrosion protection of machine parts and tools

• excellent lubrication
• protects well against corrosion
• extreme creepage capacity
• extreme loosening power for corroded and burnt connections, such as screws
• repels moisture
• dermal compatibility
• contains environmentally friendly propellant and solvent
• biodegradable
• wide operating temperature range: – 20 to +100 °C

GLEIT-μ^® SF 640 is a specially selected combination of mineral base oils with matched light-coloured solid lubricants.

This lubricant combines the requirement for a product for three applications: loosening – protecting – lubricating.

The use of GLEIT-μ^® SF 640 enables the loosening of corroded screw connections on the one hand and the lubrication and preservation of machine elements on the other.

Das Einsatzgebiet von GLEIT-μ^® SF 640 is used to lubricate components and machine elements that require a thin, highly effective lubricating film. Thanks to the low-viscosity base oil, GLEIT-μ^® SF 640 is also very well suited for loosening burnt or corroded screw connections and as a thin corrosion protection layer for storage and transport purposes. GLEIT-μ^® SF 640 is also suitable as a machining lubricant (non-cutting and machining) for brass, aluminum and other non-ferrous metals.

• linkages, chains, hinges
• Loosening of burnt or seized screw connections
• automotive, industry and workshop
• Thin film lubrication of machine parts (e.g. bicycle chains, locks, springs) and measuring instruments
• corrosion protection of machine parts and tools

• excellent lubrication
• protects well against corrosion
• extreme creepage capacity
• extreme loosening power for corroded and burnt connections, such as screws
• repels moisture
• dermal compatibility
• broad operating temperature range: -25 to +80 °C

GLEIT-μ^® SF 670 is based on the combination of a partially synthetic grease with a high proportion of GLEIT-μ^® WFSS (white solid lubricants). To achieve the highest possible penetration capacity and to enable simple application, the active ingredient is dissolved in a solvent. After the solvent has evaporated, a very well adhering, pressure and water-resistant lubricant fi lm with excellent lubricating properties remains, which is also resistant to acids and alkalis.

The area of application of GLEIT-μ^® SF 670 is the lubrication of chains, ropes and sliding surfaces, for which very good adhesion is important (fast-running chains). Furthermore, it is excellently suited to the lubrication of parts where high water resistance, good wear protection properties and lubrication performance are required.

• all kinds of chains (roller chains, bush chains, O-ring chains, etc.)
• linkages, chains, hinges
• Wire rope
• slide rails, slide tracks
• guides and drives in car washes

• excellent lubrication
• protects well against corrosion
• extreme creepage capacity
• very good adhesion and slipresistance
• extends the lubrication intervals
• light coloured and, therefore, clean to use
• Operating temperature range: -15 to +125 °C

GLEIT-μ^® SF 675 is based on a water-immiscible, fully synthetic base oil with synthetic additives. Due to its high temperature resistance, this lubricant is ideally suited for lubrication up to 260 ° C. At higher temperatures, the high-performance oil evaporates almost without leaving any residue, with the remaining EP additives taking on a certain emergency lubrication.

Das Einsatzgebiet von GLEIT-μ^® SF 675 sind die Schmierung von Ketten bei hohen Temperaturen, wie Transportketten in Öfen in der Glas-, Metall-, Holz-, Papierindustrie, Gleitbahnen, Gelenke und Gleitlager und andere Anwendungen bei hohen Temperaturen.

• at high temperatures up to +260°C
• all kinds of chains (roller chains, bush chains, O-ring chains, etc.)
• linkages, chains, hinges

• excellent lubrication
• protects against wear
• high temperatures up to +260°C
• fully synthetic
• extends the lubrication intervals
• evaporates almost completely at higher temperatures
• contains EP, corrosion protection and change protection

GLEIT-μ^® SF 690 is a mineral oil-based cutting oil with high-performance solid lubricants for optimised cutting performance. The ingredients used are chlorine-free, non-reactive and do not contain any undesirable components such as nitrites, heavy metals or sulphur. The excellent lubricating and cutting performance of this lubricating fluid is achieved through the synergetic ingredients with the selected base oil.

GLEIT-μ^® SF 690 for all heavy and very difficult machining processes. For the processing of materials such as cold work steels, case-hardened steels, heat-treatable steels, nitriding steels, creep-resistant steels, corrosion resistant ferritic, austenitic and martensitic hardening steels, heat-resistant steels, nickel-based alloys, cobalt-based alloys , titanium and titanium alloys. Use with non-ferrous metals (no staining) or as a high-performance stamping oil is also possible.

• Reaming
• Milling, Shaping
• Drilling
• Stamping
• Forming

• increased tool service life
• for almost all machining processes
• best suited to steel and special materials
• no colour change on non-ferrous metals
• reduces build-up edges
• results in a high surface quality
• chlorine-free cutting oil
• odourless